2 CHANNEL UNIVERSAL CANTILEVER TRANSDUCER INCORPORATING CALIBRATION SETUP COVERING SIZES FROM Ø1" (Ø25.4mm) TO Ø2 1/8" (Ø54mm) ©

Click here or on the image below for a printable Adobe Acrobat®

version of this document.

Two independent channels with 6mm linear deflection after 10% pre-straining
350W full bridge strain gauges with 10.00 V DC input giving approx. 0.5mV/mm/V minimum
Multi-range output by altering beam suspension length - deflection reduced and sensitivity increased
Independent variable force spring jigs to reduce hysteresis
Gauges compensation resistors and interconnecting wires completely potted for high pressure and temperature tolerance 15,000 psig and 200° C
PTFE lead wires terminated in WW Fischer Series 102 in-line plug and socket.
Temperature compensation to 200° C
10 point linear regression calibration certificate at room condition and 200° C
2 off x 2.5 metre shielded PTFE conductor PTFE sheathed lead cable with calibration shunts.
Stabilising ring to render delicate cantilever arms for rough manipulations
Operating manual for cantilever
Optional setup for future calibration