Functional Materials for Advanced Core Analysis, Rock Mechanics & Earth Sciences in the Laboratory & Field

Click here or for a printable Adobe Acrobat®

version of this document.

Supplied in Ø1" (25.4mm) and Ø1.5" (38.1mm) - usual thickness 5mm (other sizes available on request)
Conversion to Oil-Wet character with Quilon C agent available.

Oil-Wet and Water Wet available For example ErgoTech FP1 Oil Wet Microporous Membrane (Water Entry Pressure ~ 11 bars) Supplied in Ø1" (25.4mm) and Ø1.5" (38.1mm) - (other sizes available on request)

Various Pc and Electrical Contact Materials
Oil-Wet and Water Wet versions available Supplied in Ø1" (25.4mm) and Ø1.5" (38.1mm) - (other sizes available on request)

Malleable Tin Tubes
Parallel Wall Malleable Tin Alloy Tubes ( Ø 38.1mm I/D x 180mm long x 0.2mm wall thickness) Suitable for Unconsolidated and Friable Core Mounting for Subsequent Routine Core Analysis

Screens
Various mesh sizes available in 316L Stainless Steel and PTFE Supplied in Ø1" (25.4mm) and Ø1.5" (38.1mm) - (other sizes available on request

FEP Heatshrink
FEP Heat-shrink Method of Mounting Unconsolidated Sediments Supplied in Ø1" (25.4mm) and Ø1.5" (38.1mm) - (other sizes available on request)

This drawing is copyright (c) and the associated procedure is the property of ErgoTech. It is issued confidentially to parties interested in acquiring the process and to authorised/licensed clients using it. The drawing is not to be reproduced or circulated by any parties without the written consent of ErgoTech which will not be unduly withheld. The drawing must not be mounted on any display boards or reproduced in reports without the written consent of ErgoTech. When permission is granted the reproduction must be identical to the original and the ownership of the drawing and the process embodied acknowledged to ErgoTech by displaying "ErgoTech (c)"

Pore Size (um)	Calculated Bubble Point Pressure(bar)
0.15	18.9
0.08	35.5