ADVANCED HYDROSTATIC SLEEVE PRESSURE LOADED
PcRI CORE FLOW CELL
WITH CLAMP & PANEL MOUNTING SWIVEL MECHANISM ©

Click here or on the image below for a printable Adobe Acrobat®
version of this document..

The apparatus is a combined core flow cell and Pc/RI apparatus by virtue of the electrical insulation of the telescopic process line and the separation of the flow and dP lines.

The core flow cell is manufactured in high strength stainless steel (17/4 PH Condition H1150). The wetted parts exposed corrosive brines are made for super duplex stainless steel (UNS 32760) and austenitic stainless steel 316L. Due to the versatile design of the equipment all wetted parts can be interchanged with other special alloys such as Ti6A14V and Hastelloy c0-276 at a later stage. All "O" rings are Fluoroelastomer B 90 IRHD hardness.

The cell is designed to 38.5 MPa pressure at 200°C in accordance with BS5500: 1991 pressure vessels design code. It will be pressure tested for 1 hour at room temperature at 1.5 times the design pressure multiplied by the strength reduction factor of the cell body alloy at 200°C. The cell body is engraved with a serial number, test pressure and date which are also listed in a Certificate of Pressure Test.

ErgoTech
Unit 3 Cae Ffwt Business Park Glan Conwy Conwy
LL28 5SP UK

This drawing is copyright (c) and the associated procedure is the property of ErgoTech. It is issued confidentially to parties interested in acquiring the process and to authorised/licensed clients using it. The drawing is not to be reproduced or circulated by any parties without the written consent of ErgoTech which will not be unduly withheld. The drawing must not be mounted on any display boards or reproduced in reports without the written consent of ErgoTech. When permission is granted the reproduction must be identical to the original and the ownership of the drawing and the process embodied acknowledged to ErgoTech by displaying "ErgoTech (c)"

ErgoTech
Tel. (44) (0)1492 592684
Fax. (44) (0)1492 592685