ErgoSeal range of hot dip strippable plastic coatings
Click here
for
a printable Adobe Acrobat® version of the ErgoSeal 1 Brochure.
Click here
for
a printable Adobe Acrobat® version of the ErgoSeal 2 Brochure.
Click here for a printable Adobe Acrobat® version of the ErgoSeal 3 Brochure.
ErgoSeal1
APPLICATION
It is an opaque
wax-based, hot-dip applied reservoir core enveloping/encasing barrier
coating of approx. 3 mm thick.
It imparts
mechanical protection all over the essential vapour barrier No.1 film
(Saran, polyethylene etc) and No.2 premium thickness aluminium foil wrapped
core.
For successful
long-term fluid preservation use a pliable but bare solid suspension wire
during the dipping process. Plastic monofilament may perish and fibrous
twine may act as a capillary wick to enhance fluid losses during the storage
period.
The advantage
of this material is that it requires only moderately elevated temperature
in use. It is removed from the core by hand stripping after making a cut
in the tough solid coating.
Cleanly removed
uncontaminated ErgoSeal 1 is reusable by melting first in a separate heating
bath and examined for quality before adding to newly melted stock.
ErgoSeal2
APPLICATION
It is a translucent,
hot-dip applied reservoir core enveloping/encasing barrier coating of
approx. 3 mm thick. It imparts mechanical protection all over the essential
vapour barrier No.1 film (Saran, polyethylene etc) and No.2 premium thickness
aluminium foil wrapped core.
For successful
long-term fluid preservation use a pliable but bare solid suspension wire
during the dipping process.
Plastic monofilament
may perish and fibrous twine may act as a capillary wick to enhance fluid
losses during the storage period.It is removed
from the core by hand stripping after making a cut in the tough solid
coating.
Cleanly removed
uncontaminated ErgoSeal 2 is reusable by melting first in a separate heating
bath and examined for quality before adding to newly melted stock.
ErgoSeal3
APPLICATION
It is a semi - translucent, off white coloured hot-dip applied reservoir core enveloping / encasing barrier coating of approx. 3 mm thick. It imparts mechanical protection all over the essential vapour barrier No.1 film (Saran, polyethylene etc) and No.2 premium thickness (30 micron) aluminium foil wrapped core.
For successful long-term fluid preservation use a pliable but bare solid suspension wire during the dipping process. Plastic monofilament may perish and fibrous twine may act as a capillary wick to enhance fluid losses during the storage period.
It is removed from the core by hand stripping after making a cut in the tough solid coating.
Cleanly removed uncontaminated *NEW* ErgoSeal 3 is reusable by melting first in a separate heating bath and examined for quality before adding to newly melted stock.
ErgoTech
Unit 3 Cae Ffwt Business Park Glan Conwy Conwy
LL28 5SP UK
This drawing is copyright (c) and the associated procedure is the property of ErgoTech. It is issued confidentially to parties interested in acquiring the process and to authorised/licensed clients using it. The drawing is not to be reproduced or circulated by any parties without the written consent of ErgoTech which will not be unduly withheld. The drawing must not be mounted on any display boards or reproduced in reports without the written consent of ErgoTech. When permission is granted the reproduction must be identical to the original and the ownership of the drawing and the process embodied acknowledged to ErgoTech by displaying "ErgoTech (c)"
version of the ErgoSeal 1 Brochure.